Home
Kystar SE1
฿100,000.00
- Kystar SE1 splicing server
- เครื่อง รับ และ แยกสัญญาณภาพ HDMI, SDI, DP, HDbaseT, Audio
- รองรับสัญญาณ 2K, 4K
- สามารถแยกการ์ด และ เพิ่มการ์ดได้
- รองรับการเชื่อมต่อกับ VDO Processor เพื่อแสดงภาพ
- รับประกัน 2 ปี
- Brochure : SE1 Specification_V1.1.2
หมายเหตุ : กรุณาเช็คสินค้าก่อนทำการสั่งซื้อทุกครั้ง เพราะบางรายการอาจไม่มีสินค้าในสต็อก
Kystar SE1 splicing server
Overview Kystar SE1
- SE1 splicing server is a professional video processing and control equipment, pure hardware FPGA design architecture, all boards adopt modular design, with comprehensive input and output interfaces, and can flexibly configure input and output boards according to different project application requirements. It can be widely used in TV stations, dispatching rooms, command centers, exhibition halls, conference rooms, stage performances, data centers, multi-function halls and other scenarios.
Features Kystar SE1
- The single board supports 8 channels of 2K@60Hz.
- The single board supports 2 channels of 4K@60Hz input, and supports splicing input up to 8K×2K@60Hz.
- The single board supports 2 channels of 4K@60Hz splicing output, and supports up to 8K×2K@60Hz load.
- The whole machine supports 44 channels of 2K@60Hz input and 40 channels of 2K@60Hz output at the same time.
- Single channel supports HDMI2.1 or DP1.4 input, and the maximum resolution supports 8K×4K@30Hz.
- Single board supports a maximum of 16 2K@60Hz layers or 8 4K@30Hz layers or 4 4K@60Hz layers.
- Single machine supports a maximum of 16 2K layers.
- There is no need to install software, and it is controlled by the web terminal, which is not limited by the operating system and operating platform.
Simple and fast operation, real-time response, and easy configuration of complex scenarios.
Scene management Kystar SE1
- Different preset parameters can be saved as scenes, and multi-screen scenes and single-screen scenes can be called with one key, and can be easily switched.
Group Screen Management
- It supports up to 8 groups of screen management, and the output resolution of each group of screens
- can be set separately, which can easily complete the display control of special-shaped screens and complex scenes.
Pre-Edit Management Kystar SE1
- The current device output is not affected when the layer is edited.
Loop management Kystar SE1
- Support input source patrolling, multi-channel input source timing switching. Support scene patrol to meet unsupervised application scenarios.
Input source logo
- Characters are embedded in each input signal, the input signal is identified, and the embedded characters are displayed while the input signal is displayed on the screen.
Scrolling subtitles Kystar SE1
- Text can be superimposed on the layer, and subtitles can be displayed statically or scrolled dynamically. Users can adjust the background color and scrolling of subtitles.
- Style, etc. can be set, and a single screen supports up to 8 subtitles.
Seamless switching
- When switching the signal of the layer or calling the plan, there is no black screen, no flicker, and no freeze during the whole process. Kystar SE1
Hardware real-time monitoring
- Support hardware monitoring, including real-time monitoring of hardware module temperature and voltage, firmware version, operating status, fan speed, etc.
Support remote upgrade
- The program can be upgraded remotely, and the system maintenance is simple.
Support input module, output module
- Automatic switching in case of failure, double guarantee of system operation, switching process does not affect equipment operation.
Input board of Kystar SE1
| Performance parameters | 
DVI input l Number of input interfaces：4 channels DVI l Maximum input resolution：2048×1152@60Hz l Custom resolution：Limit width 2048（2048×1152@60Hz） Limit height 2048（1152×2048@60Hz） l Video input format：RGB444，YCbCr444，YCbCr422 Specifications l Input signal level：TMDS /CML l Impedance：Difference 100ohm l Power：5W Status LEDs l On: The power supply of the device is normal l Off: Abnormal power supply of the device *The first column of lights from left to right indicates DVI-1 on the upper side and DVI-2 on the lower side; Similarly, the second column of lights indicates DVI-3 on the upper side and DVI-4 on the lower side. |
| Performance parameters | 
HDMI 1.3 input l Number of input interfaces：4 channels HDMI 1.3 l Maximum input resolution：2048×1152@60Hz l Custom resolution：Limit width 2048（2048×1152@60Hz） Limit height 2048（1152×2048@60Hz） l Video input format：RGB444，YCbCr444，YCbCr422 l Support audio Specifications |
| l Input signal level：TMDS /CML
l Impedance：Difference 100ohm l Power：5W Status LEDs l On: The power supply of the device is normal l Off: Abnormal power supply of the device *The first column of lights from left to right indicates HDMI-1 on the upper side and HDMI-2 on the lower side; Similarly, the second column of lights indicates HDMI-3 on the upper side and HDMI-4 on the lower side. |
|
| Performance parameters |
HDMI1.3 input l Number of input interfaces：8 channels HDMI 1.3 l Maximum input resolution：2048×1152@60Hz l Custom resolution：Limit width 2048（2048×1152@60Hz） Limit height 2048（1152×2048@60Hz） l Video input format：RGB444，YCbCr444，YCbCr422 l Support audio Specifications l Input signal level：TMDS /CML l Impedance：Difference 100ohm l Power：5W Status LEDs l On: The power supply of the device is normal l Off: Abnormal power supply of the device *From left to right, the first column of lights indicates HDMI-1 on the upper side and HDMI-2 on the lower side. Similarly, the second column of lights indicates HDMI-3 on the upper side and HDMI-4 on the lower side. The third column of lights indicates HDMI-5 on the upper side and HDMI-6 on the lower side; The fourth column of lights indicates HDMI-7 on the upper side and HDMI-8 on the lower side. |
| Performance parameters | 
3G-SDI input l Number of input interfaces: 4 channels 3G-SDI l Maximum input resolution: 1920 × 1080@60Hz |
| l Video source standards: ST-424 (3G), ST-292 (HD), and SMPTE 259 SD
l Compatible with HD-SDI and SD-SDI standards l Support loop, SDI loop interface corresponds one-to-one with input interface l Support 1080i/576i/480i de interlacing l Not supporting setting input resolution Specifications l Input signal level：TMDS /CML l Impedance：Coaxial 75ohm l Power：10W Status LEDs l On: The power supply of the device is normal l Off: Abnormal power supply of the device *The first column of lights from left to right indicates SDI-1 on the upper side and SDI-2 on the lower side; Similarly, the second column of lights indicates SDI-3 on the upper side and SDI-4 on the lower side. |
|
| Performance parameters |
HDMI 1.4 input l Number of input interfaces：2 channels HDMI 1.4 l Maximum input resolution：4096×2160@30Hz l Custom resolution：Limit width 4096（4096×2160@30Hz） Limit height 4096（2000×4096@30Hz） l Video input format：RGB444，YCbCr444，YCbCr422 l Support audio Specifications l Input signal level：TMDS /CML l Impedance：Difference 100ohm l Power：5W Status LEDs l On: The power supply of the device is normal l Off: Abnormal power supply of the device *From left to right, the first column of lights indicates HDMI1.4-1 on the upper side and HDMI1.4-2 on the lower side. |
| Performance parameters | 
HDBaseT_2K l Maximum input resolution：2048×1152@60Hz l Custom resolution：Limit width 2048（2048×1152@60Hz） Limit height 2048（1152×2048@60Hz） l Support audio Specifications l Input signal level：TMDS /CML l Impedance：Difference 100ohm l Power：20W l Transmission distance: maximum 100 meters (Category 6 twisted pair) |
| Performance parameters |
12G-SDI input l Number of input interfaces: 1 channel 12G-SDI l Maximum input resolution: 4096 × 2160@60Hz l Video source standards: ST-2082-1 (12G), ST-2081-1 (6G), ST-424 (3G), ST-292 (HD), and SMPTE 259 SD l Compatible with 6G-SDI, 3G-SDI, HD-SDI, and SD-SDI standards l Supporting ring out l Support 1080i/576i/480i de interlacing l Not supporting setting input resolution Specifications l Input signal level: TMDS/CML l Impedance: Coaxial 75ohm l Power consumption: 10W Kystar SE1 Status LEDs l On: The power supply of the device is normal Kystar SE1 l Off: Abnormal power supply of the device |
Output board of Kystar SE1
l Input signal level：TMDS /CMLl Impedance：Difference 100ohml Power：10W*AUDIO-1 audio output is bound to the DP1.2-1 output port, while AUDIO-2 audio output is bound to theDP1.2-2 output port.
| Performance parameters | 
DVI output l Video output format：RGB444，YCbCr444，YCbCr422l Support audioSpecificationsl Input signal level：TMDS /CMLl Impedance：Difference 100ohml Power：20Wl Transmission distance: maximum 100 meters (Category 6 twisted pair) l Number of output interfaces：4 channels DVI l Maximum output resolution：2048×1152@60Hz l Custom resolution：Limit width 4096（4096×616@60Hz） Limit height 4096（480×4096@60Hz） l Video output format：RGB444，YCbCr444，YCbCr422 l Support audio Specifications l Input signal level：TMDS /CML l Impedance：Difference 100ohm l Power：5W |
| Performance parameters | 
HDMI 1.3 output l Number of output interfaces：4 channels HDMI 1.3 l Maximum output resolution：2048×1152@60Hz l Custom resolution：Limit width 4096（4096×616@60Hz） Limit height 4096（480×4096@60Hz） l Video output format：RGB444，YCbCr444，YCbCr422 l Support audio Specifications l Input signal level：TMDS /CML l Impedance：Difference 100ohm |
| Performance parameters | 
HDMI 1.3 output l Number of output interfaces：8 channels HDMI 1.3 l Maximum output resolution：2048×1152@60Hz l Custom resolution：Limit width 4096（4096×616@60Hz） Limit height 4096（480×4096@60Hz） l Video output format：RGB444，YCbCr444，YCbCr422 l Support audio Specifications l Input signal level：TMDS /CML l Impedance：Difference 100ohm l Power：10W |
| Performance parameters | 
3G-SDI output l Number of output interfaces: 8 channels 3G-SDI l Maximum output resolution: 1920 × 1080@60Hz l Output video source standards: ST-424 (3G), ST-292 (HD), and SMPTE 259 SD l Compatible with HD-SDI and SD-SDI standards l Support 1080i deinterlacing output l Supporting output timing selection Specifications l Input signal level：TMDS /CML l Impedance：Coaxial 75ohm l Power：10W |
| Performance parameters | 
HDBaseT_2K output l Number of output interfaces：4 channels RJ45 l Maximum output resolution：2048×1152@60Hz l Custom resolution：Limit width 4096（4096×616@60Hz） Limit height 4096（480×4096@60Hz） |
| Performance parameters | 
l Number of output interfaces：2 channels RJ45 l Maximum output resolution：4096×2160@30Hz l Custom resolution：Limit width 4096（4096×2160@30Hz） Limit height 4096（2160×4096@30Hz） l Video output format：RGB444，YCbCr444，YCbCr422 l Downward compatibility with HDBaseT_ 2K l Support audio Specifications Kystar SE1 l Input signal level：TMDS /CML l Impedance：Difference 100ohm l Power：20W l Transmission distance: maximum 100 meters (Category 6 twisted pair) |
| Performance parameters |
DP 1.2 output l Number of output interfaces: 2 channels DP1.2 output, 2 channels 3.5mm audio output l Maximum output resolution: 4096 × 2160@60Hz Or 7680 × 1200@60Hz l Custom resolution：Limit width 8192（8192×1080@60Hz） Limit height 8192（1000×8192@60Hz） l Video output formats: RGB444, YCbCr444, YCbCr422 l Supporting on the go audio l Support 3.5mm audio output |
| Performance parameters | 
Interface parameters Kystar SE1 l COM-1：RS232 control port, can be connected with the central control system l COM-2：RS232 control port, can be connected with central control system; can be used as COM-1 loop-out port l USB：The USB3.0 interface is only used for system upgrades and cannot be used for power supply to other devices l ETHERNET：Gigabit network port, communication interface, connected with control computer, router or switch, for web control and Status LEDs Kystar SE1 l RUN – Fast flashing: the device is starting – Fixed frequency flashing: 1/2S, the system is running normally – No flashing or no light: system failure (after the device is turned on) l PWR – On: The power supply of the device is normal – Off: Abnormal power supply of the device |
Detail of Kystar SE1
| Model | SE1 |
| Chassis Specifications | 1.5U |
| The maximum supported input cards | 2 pcs |
| The maximum support input | 16 pcs |
| The maximum number of supported output cards installed | 2 pcs |
| Maximum support output channels | 16 pcs |
| Maximum number of layers | 16 |
| Input power | 110-240V~，47-63Hz，1A |
| Overall power consumption | 80W |
| Working environment | 0~45℃，0%RH～80%RH，no condensing |
| Storage environment | -20℃~65℃，0%RH～95%RH，no condensing |
| Dimensions | 482.6mm×358.7mm×139.5mm（L×W×H） |
| Net weight | 5KG |
| Gross weight | 6KG |
Connection diagram Kystar SE1
Size of Kystar SE1
สอบถามเพิ่มเติม
| น้ำหนัก | 5 กก. |
|---|---|
| ขนาด | 482 × 358 × 139 เซนติเมตร |
Brand
KYSTAR
สินค้าที่เกี่ยวข้อง
